Compact Cylinder

Compact Cylinder

* Under the circumstance of same drivers, only 50% of the standard Cylinder installation space is needed
* Proximity transducer is flush mounted inside sensor groove, on one hand, prevent sensor from mechanical damage
* Extra buffering ring at terminal place can absorb residual energy of movement at a high speed and machine circulation
* Accessories are abundant in variety, which makes cylinder can be installed almost at any places

Description of Compact Cylinder







  • Products features:
    1. ADVU series compact Cylinder can save 50% space of the standard cylinder with the same driving force
    2. Proximity transducer is flush mounted inside sensor groove, on one hand, there is no need of extra mounting package, on the other hand,
    it can prevent sensor from mechanical damage
    3. Extra buffering ring at terminal place can absorb residual energy of movement at a high speed and machine circulation
    4. Accessories are abundant in variety, which makes cylinder can be installed almost at any places
     
    Specification

    Bore (mm) 12 16 20 25 32 40 50 63 80 100
    Motion Pattern Double action
    Working Medium Filter compressed air, lubrcate or did't lubricate
    Operating Voltage Range 0.12~1MPa 0.1~1MPa 0.08~1MPa 0.06~1MPa
    Ensured Pressure Resistance 1.35MPa
    Operating Temperature Range -20~+80℃
    Operating Speed Range 30~800mm/s
    Buffer Type Double's carrying to have can't adjust type buffer
    Joint Pipe Bore M5 G1/8 G1/4

     






  • Products Features:
    1. Manufactured according to Asia standards, the normal type is double action. Also the single action with spring
     return and single action with spring extend
    2. Space is saved. The magnetic switch is installed in the Cylinder, not on the cylinder barrel
    3. Magnetic switch can be installed on different sides
    4. Easy to be installed, through bores and female thread on both ends are the same
     
    Specification

    Bore(mm) 12 16 20 25 32 40 50 63 80 100
    Motion Pattern Doulble Action
    Single Action Extrusion type Singe Action Drawing-in Type -
    Working Medium Air（Through 40μm filter net percolations）
    Operating Voltge Range Double Action 0.1~0.9MPa（14~128PSi）
    Single Action 0.2~0.9MPa（28~128PSi） -
    Ensued Pressure Resistance 1.5MPa（213PSi）
    Operating Temperature Range℃ -5~+70
    Operating Speed Range mm/s Double Action 30~500 30~350 30~250
    Single Action 100~500 -
    Joint Pipe Boer M5×0.8 G1/8 G1/4 G3/8







  • Products Features:
    1. Similar to SMC appearance.
    2. The end cover used the heat expansion, pressure rolling technics. Strength is intensified, vibration proof, with compact appearance and little space.

    Specification

    Cyilnder Diameter(mm) 12 16 20 25 32 40 50 63 80 100
    Fluid Air
    Acting Mode Double-acting Single acting:with spring return /with spring extend
    Ensered Pressure Resistance 1.5MPa(15.3kgf/cm2)
    Maximum Working-pressure 1.0MPa(10.2kgf/cm2)
    Ambient and Medium Temprature 5~60℃
    Thread Type Inner Thread(Standard)，Outer Thread(Optional)
    Cushion NO
    Tolerance of Stroke
    +1.0
    0
    *Lubrication Not Requierd
    Installation Theough Hole(Standard),Inner size on the two sides(Optional)
    Joint Tube Caliber M5×0.8 1/8 1/4 3/8

Hydraulic Components ,One-way Restrictive Valve ,Stopper Cylinder ,Rodless Cylinder ,Specialized Cylinder ,Hand Valve ,Mini Cylinder ,Standard Cylinder ,Double Shaft Cylinder ,Pneumatic Muffler ,Quick Exhaust Valve ,Mechanical Valve ,Shuttle Valve ,Compact Cylinder ,Ligtened Cylinder ,Free-installation Cylinder ,Needle Cylinder ,Directional Valve ,Air Gun ,Foot Valve ,Rotary Valve ,Pneumatic Grippers ,Hydraulic Cylinder