Metal Fast Joint

Metal Fast Joint

The standard metal fast joint is with inch tubing and NPTF thread. It has different connecting ways, tubing to tubing, tubing to thread, straight fittings, elbow fittings, tee fittings, etc.

AirTOP metal fast joint is easy to be assembled, without the help of any tools. They are mainly used in the fields like compressed air, Pneumatic, etc.

Description of Metal Fast Joint

  •    

    一. MPa.JKM series bayonet to change and in charge of and connect soon, suitable for and join hard quality,
    half hard quality nylon tube, silent stiock tube, neavy working pressure 1.0 MPas most．series this in charge
    of and connect and have fast intubate and pull out and in charge of, adapter that terminal station connect direction
    can the wanton merit of rotating etc, And installation is convenient, it is reliable to be sealed, taken over firm, beautiful ly．

    (二)1、Trachea get rid of burr after cutting off, all alone with nurse mean connect card can reach firm connection and
    seal in the sets of socket (must insert inally)．
    2、When dismantling trachea, on one hand with nurse mean connect card set press, another on the other hand easily
    once drawing annoyinf to in charge of and pull out and appear．
    3、Trachea reciprocate pull out and after appearing, should cut and go tip wear and tear after partlying, build flat
    continueing using many times．
    4、Right angle, trigonometry, stone terminal station in charge of and connect, after installing,only need to rotate and
    connect the body, Namely the adjustable adapter direction that connect. ndicate: Every interface whorl designrotatory
    type of M6

    ● The mark gives a demonstration
    ①: The bayonet three direct links terminal station rotate one and change the tube to connet Nominal and open directly
    Ø6MM is JKH-3T-Z6 M10×1

    ②: Bayonet three direct links terminal station rotate piece change and turn into foot-path tube connect Nominal and open
     directly Ø6MM-B=Ø8MM-C=Ø4MM、JKH-3T-Z6-8-4 M10×1

    Specifications

    Bayonet stone terminal F type will change the tube to connect soon
    Serial number

    Type Specification(D)
    External diameter (D)
    whorl (M)
    04192
    JKH-4F-Z3

    4
    M6×1
     
     
    04193
    JKH-4F-Z4
    6
    M8×1
     
     
    04194
    JKH-4F-Z6
    8
    M10×1
    G1/8"
    ZG1/8"
    04195
    JKH-4F-Z8
    10
    M12×1.25
    G1/4"
    ZG1/4"
    04196
    JKH-4F-Z10
    12
    M16×1.5
    G3/8"
    ZG3/8"
    Bayonet Stone terminal station rotates and change the tube to connect sonn
    Serial number

    Type Specification(D)
    External diameter (D)
    whorl (M)
    04111
    JKH-4T-Z2.5

    4
    M5×0.8
     
     
    04112
    JKH-4T-Z3
    4
    M6×1
     
     
    04113
    JKH-4T-Z4
    6
    M8×1
     
     
    04114
    JKH-4T-Z6
    8
    M10×1
    G1/8"
    ZG1/8"
    04115
    JKH-4T-Z8
    10
    M12×1.25
    G1/4"
    ZG1/4"
    04116
    JKH-4T-Z10
    12
    M16×1.5
    G3/8"
    ZG3/8"
    Bayonet three direct links terminal F type changes the tube to connect quickly
    Serial number

    Type Specification(D)
    External diameter (D)
    whorl (M)
    04172
    JKH-3F-Z3

    4
    M6×1
     
     
    04173
    JKH-3F-Z4
    6
    M8×1
     
     
    04174
    JKH-3F-Z6
    8
    M10×1
    G1/8"
    ZG1/8"
    04175
    JKH-3F-Z8
    10
    M12×1.25
    G1/4"
    ZG1/4"
    04176
    JKH-3F-Z10
    12
    M16×1.5
    G3/8"
    ZG3/8"
    Bayonet three direct links terminal knuckle joint transfers to the tube to connect quickly
    Serial number

    Type Specification(D)
    External diameter (D)
    whorl (M)
    04212
    JKH-J3T-Z3

    4
    M6×1
     
     
    04213
    JKH-J3T-Z4
    6
    M8×1
     
     
    04214
    JKH-J3T-Z6
    8
    M10×1
    G1/8"
    ZG1/8"
    04215
    JKH-J3T-Z8
    10
    M12×1.25
    G1/4"
    ZG1/4"
    04216
    JKH-J3T-Z10
    12
    M16×1.5
    G3/8"
    ZG3/8"
    Bayonet to four transfer to tube commect soon
    Serial number
    Type Specification(D)
    External diameter(D)
    04122
    JKH-4T-3
    4
    04143
    JKH-4T-4
    6
    04124
    JKH-4T-6
    8
    04125
    JKH-4T-8
    10
    04126
    JKH-4T-10
    12
    Bayonet to wear board transfer to tube connect soon while being direct
    Serial number
    Type Specification(D)
    External diameter(D)
    04082
    JKH-ZC-3
    4
    04083
    JKH-ZC-4
    6
    04084
    JKH-ZC-6
    8
    04085
    JKH-ZC-8
    10
    04086
    JKH-ZC-10
    12
    Bayonet U type transfers to the tube to connect quickly
    Serial number
    Type Specification(D)
    External diameter(D)
    04103
    JKH-3U4
    6
    04104
    JKH-3U-6
    8
    04105
    JKH-3U-8
    10
    04106
    JKH-3U-10
    12
    The bayonet Model U terminal station is rotated and tranfer to the tube to connect soon
    Serial number

    Type Specification(D)
    External diameter (D)
    whorl (M)
    04093
    JKH-3U-Z4
    6
    M8×1
     
     
    04094
    JKH-3U-Z6
    8
    M10×1
    G1/8"
    ZG1/8"
    04095
    JKH-3U-Z8
    10
    M12×1.25
    G1/4"
    ZG1/4"
    04096
    JKH-3U-Z10
    12
    M16×1.5
    G3/8"
    ZG3/8"
    The bayonet Model Y terminal statiom is rotated and change the tube to connect soon
    Serial number

    Type Specification(D)
    External diameter (D)
    whorl (M)
    04071
    JKH-3Y-Z2.5

    4
    M5×0.8
     
     
    04072
    JKH-3Y-Z3
    4
    M6×1
     
     
    04073
    JKH-3Y-Z4
    6
    M8×1
     
     
    04074
    JKH-3Y-Z6
    8
    M10×1
    G1/8"
    ZG1/8"
    04075
    JKH-3Y-Z8
    10
    M12×1.25
    G1/4"
    ZG1/4"
    04076
    JKH-3Y-Z10
    12
    M16×1.5
    G3/8"
    ZG3/8"
    The bayonet right angle knuckle joint terminal station will change the tube to connect soon
    Serial number

    Type Specification(D)
    External diameter (D)
    whorl (M)
    04132
    JKH-JJ-Z3
    4
    M6×1
     
     
    04133
    JKH-JJ-Z4
    6
    M8×1
     
     
    04134
    JKH-JJ-Z6
    8
    M10×1
    G1/8"
    ZG1/8"
    04135
    JKH-JJ-Z8
    10
    M12×1.25
    G1/4"
    ZG1/4"
    04136
    JKH-JJ-Z10
    12
    M16×1.5
    G3/8"
    ZG3/8"

     

                                                         

     

  •

    一. MPa.JKM series bayonet to change and in charge of and connect soon, suitable for and join hard
    quality, half hard quality nylon tube, silent stiock tube, neavy working pressure 1.0 MPas most．series
    this in charge of and connect and have fast intubate and pull out and in charge of, adapter that terminal
    station connect direction can the wanton merit of rotating etc, And installation is convenient, it is reliable
    to be sealed, taken over firm, beautiful ly．

    (二)1、Trachea get rid of burr after cutting off, all alone with nurse mean connect card can reach firm connection
    and seal in the sets of socket (must insert inally)．
    2、When dismantling trachea, on one hand with nurse mean connect card set press, another on the other hand
    easily once drawing annoyinf to in charge of and pull out and appear．
    3、Trachea reciprocate pull out and after appearing, should cut and go tip wear and tear after partlying, build flat
    continueing using many times．
    4、Right angle, trigonometry, stone terminal station in charge of and connect, after installing,only need to rotate
    and connect the body, Namely the adjustable adapter direction that connect. ndicate: Every interface whorl design
    rotatory type of M6

    ● The mark gives a demonstration
    ①: The bayonet three direct links terminal station rotate one and change the tube to connet Nominal and open
    directly Ø6MM is JKH-3T-Z6 M10×1

    ②: Bayonet three direct links terminal station rotate piece change and turn into foot-path tube connect Nominal
    and open directly Ø6MM-B=Ø8MM-C=Ø4MM、JKH-3T-Z6-8-4 M10×1

    Specifications

    Bayonet to transfer to tube connect soon while being direct
    Seria lnumber

    Type Specification(D)
    External diameter (D)
    		 Whorl (M)
    04011
    JKH-Z2.5

    4
    M5×0.8
     
     
    04012
    JKH-Z3
    4
    M6×1
     
     
    04013
    JKH-Z4
    6
    M8×1
     
     
    04014
    JKH-Z5
    8
    M10×1
    G1/8"
    ZG1/8"
    04015
    JKH-Z8
    10
    M12×1.25
    G1/4"
    ZG1/4"
    04016
    JKH-Z10
    12
    M16×1.5
    G3/8"
    ZG3/8"
    Bayonet to transfer to tube connect soon while being diret
    Serial number Type Specification(D) External diameter (D)
    04022 JKH-3 4
    04023 JKH-4 6
    04024 JKH-6 8
    04025 JKH-8 10
    04026 JKH-10 12
    The beyonet three direct links terninal station is rotated and change the tube to connect soon
    Serial number
    Type Specification(D)
    External diameter(D)
    Whorl (M)
    04031
    JKH-Z2.5
    4
    M5×0.8
     
     
    04032
    JKH-Z3
    4
    M6×1
     
     
    04033
    JKH-Z4
    6
    M8×1
     
     
    04034
    JKH-Z6
    8
    M10×1
    G1/8"
    ZG1/8"
    04035
    JKH-Z8
    10
    M12×1.25
    G1/4"
    ZG1/4"
    04036
    JKH-Z10
    12
    M16×1.5
    G3/8"
    ZG3/8"
    The bayonet right angle will change the tube to connect soon
    Serial number
    Type Specification(D)
     
    		 External diameter(D)
    04042
    JKH-J-3
    4
    04043
    JKH-J
    		   6
    04044
    JKH-J
    8
    04045
    JKH-J
    10
    04046
    JKH-J
    12
    The bayonet three driect links terminal station is rotated and change the tube to connect soon
    Serial number
    Type Specification(D)
    External diameter(D)
    Whorl (M)
    04051
    JKH-3T-Z2.5
    4
    M5×0.8
     
     
    04052
    JKH-3T-Z3
    4
    M6×1
     
     
    04053
    JKH-3T-Z4
    6
    M8×1
     
     
    04054
    JKH-3T-Z6
    8
    M10×1
    G1/8"
    ZG1/8"
    04055
    JKH-3T-Z8
    10
    M12×1.25
    G1/4"
    ZG1/4"
    04056
    JKH-3T-Z10
    12
    M16×1.5
    G3/8"
    ZG3/8"
    The bayonet three direct links will be worth the tube to connect soon
    Serial number
    Type Specification(D)
    External diameter(D)
    04062
    JKH-3T-Z3
    4
    04063
    JKH-3T-Z4
    6
    04064
    JKH-3T-Z6
    8
    04065
    JKH-3T-Z8
    10
    04066
    JKH-3T-Z10
    12
    Bayonet direct pole form turn into foot-path transfer to tube connect soon
    Serial number
    Type Specification(D)
    External diameter(D)
    04142
    JKH-G-3
    4
    04143
    JKH-G-4
    6
    04144
    JKH-G-6
    8
    04145
    JKH-G-8
    10
    04146
    JKH-G-10
    12
    Bayonet five terminal X types will change the tube to connect soon
    Serial number

    Type Specification(D)
    External diameter (D)
    whorl (M)
    04232
    JKH-5X-Z3

    4
    M6×1
     
     
    04233
    JKH-5X-Z4
    6
    M8×1
     
     
    04234
    JKH-5X-Z6
    8
    M10×1
    G1/8"
    ZG1/8"
    04235
    JKH-5X-Z8
    10
    M12×1.25
    G1/4"
    ZG1/4"
    04236
    JKH-5X-Z10
    12
    M16×1.5
    G3/8"
    ZG3/8"
    Bayonet right angle terminal K type will be worth the tube to connect soon
    Serial number

    Type Specification(D)
    External diameter (D)
    whorl (M)
    04152
    JKH-JK-Z3

    4
    M6×1
     
     
    04153
    JKH-JK-Z4
    6
    M8×1
     
     
    04154
    JKH-JK-Z6
    8
    M10×1
    G1/8"
    ZG1/8"
    04155
    JKH-JKZ8
    10
    M12×1.25
    G1/4"
    ZG1/4"
    04156
    JKH-JK-Z10
    12
    M16×1.5
    G3/8"
    ZG3/8"

                                            

  •  

     

    JSM series Lock net-type Pipe Joints are used for connecting nylon tube, plastic tube, and the maximum working pressure is 1.0MPa.

    The joints are easy to use, solid installation and have reliable sealing performances.The terminal connector can rotate in any direction.Remark: Screw connection below M6 has no rotation type.

    Sample for mark: Lock net-type straight terminal pipe joints DN Ø6MM meaning JSM-3T-Z6 M10X1

    Lock net-type three terminal spin-lock pipe joints DN Ø6MM-B=Ø 8MM-C=Ø4MM meaning JSM-3T-Z6-8-4 M10X1

    Specifications
     

    Lock net-type straight terminal pipe joints
    No. Model Specification latus rectum
    (d)    		 external diameter
    (D×d)    		 Screw Connection M
    0512 JSM-Z3 4×3 M6×1    
    0513 JSM-Z4 6×4 M8×1    
    0514 JSM-Z6 8×6 M10×1 G1/8'' ZG1/8''
    0515 JSM-Z8 10×8 M12×1.25 G1/4'' ZG1/4''
    0516 JSM-Z10 12×10 M16×1.5 G3/8'' ZG3/8''
    Lock net-type straight pipe joints
    No. Model Specification latus rectum
    (d)    		 external diameter
    (D×d)    		 Screw Connection M
    0522 JSM-3 4×3 M6×1    
    0523 JSM-4 6×4 M8×1    
    0524 JSM-6 8×6 M10×1 G1/8'' ZG1/8''
    0525 JSM-8 10×8 M12×1.25 G1/4'' ZG1/4''
    0526 JSM-10 12×10 M16×1.5 G3/8'' ZG3/8''
    Lock net-style right-angle terminal spin-lock pipe joints
    No. Model Specification latus rectum
    (d)    		 external diameter
    (D×d)    		 Screw Connection M
    0532 JSM-J-Z3 4×3 M6×1    
    0533 JSM-J-Z4 6×4 M8×1    
    0534 JSM-J-Z5 8×6 M10×1 G1/8'' ZG1/8''
    0535 JSM-J-Z8 10×8 M12×1.25 G1/4'' ZG1/4''
    0536 JSM-J-Z10 12×10 M16×1.5 G3/8'' ZG3/8''
    Lock net-type right angle pipe joints
    No. Model Specification latus rectum
    (d)

    external diameter
    (D×d)

    		 Screw Connection M
    0532 JSM-J-3 4×3 M6×1    
    0533 JSM-J-4 6×4 M8×1    
    0534 JSM-J-5 8×6 M10×1 G1/8'' ZG1/8''
    0535 JSM-J-8 10×8 M12×1.25 G1/4'' ZG1/4''
    0536 JSM-J-10 12×10 M16×1.5 G3/8'' ZG3/8''
    Lock net-type three terminal spin-lock pipe joints
    No. Model Specification latus rectum
    (d)    		 external diameter
    (D×d)    		 Screw Connection M
    05052 JSM-3T-Z3 4×3 M6×1    
    05053 JSM-3T-Z4 6×4 M8×1    
    05054 JSM-3T-Z6 8×6 M10×1 G1/8'' ZG1/8''
    05055 JSM-3T-Z8 10×8 M12×1.25 G1/4'' ZG1/4''
    05056 JSM-3T-Z10 12×10 M16×1.5 G3/8'' ZG3/8''

                           

Hydraulic Components ,Quick Exhaust Valve ,Rodless Cylinder ,Standard Cylinder ,Compact Cylinder ,Mechanical Valve ,Hand Valve ,Mini Cylinder ,Air Gun ,Foot Valve ,Rotary Valve ,Stopper Cylinder ,Directional Valve ,Needle Cylinder ,Pneumatic Grippers ,Pneumatic Muffler ,Hydraulic Cylinder ,Free-installation Cylinder ,Shuttle Valve ,One-way Restrictive Valve ,Double Shaft Cylinder ,Specialized Cylinder ,Ligtened Cylinder