Pneumatic Grippers

Pneumatic Grippers

The key parts of MH series grippers are manufactured by ourselves, from die-casting, aluminum profile precision draw, machining, casting's shot blasting, air tightness assurance through the impregnation by vacuum pressure process and passivation treatment, aluminum profile surface oxidation treatment,to assembling and testing, for better quality control. The Cylinder covers, piston and piston rods are CNC machined, seals are from PARKER, to ensure the cylinders work stably and safely.

Description of Pneumatic Grippers

  • Products features:
    1. Parallel type, anti-dust type, point type is optional
    2. Fast reflection when it is clamped or loosened
    3. The distance and angle for clamp can be adjusted according to the appearance of the gripper, to control the Cylinder stroke through magnetic sensor switch
    4. Speed adjustable equipment is within


    Cyilnder Diameter(mm) 6 10 16 20 25 32 40
    Fluid Air
    Acting Mode Double action
    Single action:Normal open/Normal close
    Maximum Working-pressure 0.7MPa
    Maximum Working-pressure Double-acting 0.15 0.2 0.1
    Single acting 0.3 0.35 0.25
    Ambient and Medium Temprature -10~60℃
    Highest Working Frequency 180c·p·m· 60c·p·m·
    Repeated Accuracy (mm) ±0.01 ±0.02
    Magnetic Ring Within Cylinder  With(Standard)

    Note: 2)Lubrication

    No need
    Rc(PT)Joint Tube Caliber M3×0.5 M3×0.8


    Products Features:

    1.With smaller, more compact design
    2.Various installation ways, parallel axis type, vertical axis type and side connection type are optional


    Cyilnder Diameter(mm) 12 16 20 25 32 40 50 63 80 100
    Fluid Air
    Acting Mode Double-acting
    Ensered Pressure Resistance 1.5MPa(15.3kgf/cm2)
    Maximum Working-pressure 1.0MPa(10.2kgf/cm2)
    Minnimum Working-pressure 0.12.MPa(kgf/cm2)
    Ambient and Medium Temprature -10~+60℃
    Piston Speed 50~500mm/s 50~400mm/s
    Cushion Rubber buffer
    Tolerance of Stroke
    *Lubrication Not Required
    Bearing Slide bearing or ball guide bdaring
    Precision of Piston with No Swiveling Slide Bearing ±0.08° ±0.07° ±0.06° ±0.05° ±0.04°
    Ball Guide Bearing ±0.10° ±0.9° ±0.08° ±0.06° ±0.05°
    Rc(PT)Joint Tube Caliber M5×0.8 1/8 1/4 3/8


© 2009-2013 Ningbo AirTOP Pneumatic Hydraulic CO,.LTD   

Manufacturing Base:Fenghua Hongwei Pneumatic Hydraulic Kit Factory
Pneumatic Cylinder,Pneumatic Valve